2000 Alyuminiy lasan seriyasining umumiy ko'rinishi:
Nima 2000 seriyali alyuminiy qotishma lasan?
2000 nomidan seriyali qotishma alyuminiy lasan 2014 alyuminiy lasan, 2024 alyuminiy lasan, 2A16 (LY16) 2A06 (LY6), 2000 seriyali alyuminiy lasan yuqori qattiqlik bilan tavsiflanadi, misning asl jinsining eng yuqori miqdori, haqida 3-5%. 2000 seriyali alyuminiy lasan aviatsiya alyuminiyiga tegishli, currently not often used in the conventional industry.
What does the 2 series aluminum coil metal contain?
2000 series aluminum grades contain 0.7-6.8% copper and small amounts of silicon, marganets, magnesium and other elements. Copper is the alloying element of these grades, which imparts extra strength and hardness, improving their machinability. The high strength of these grades is maintained over a wide temperature range.
The 2000 series are heat treatable aluminum grades. Precipitation hardening can be performed to increase its strength. The precipitation of the intermetallic compound Al2Cu during the heat treatment increases the hardness of the alloy. Biroq, intermetallic compounds can make these grades difficult to weld. Some 2000 series grades are not suitable for arc welding because they are prone to thermal cracking and stress corrosion cracking.
2000 Series Aluminum Alloy Roll Type
| 2A01 aluminum coil |
2A02 aluminum coil |
2A04 aluminum coil |
2A06 aluminum coil |
|---|
| 2A11 aluminum coil |
2A12 aluminum coil |
2014 alyuminiy lasan |
2024 alyuminiy lasan |
|---|
2xxx Series Aluminum Roll Common Size
coils aluminum 0.5 mm *22mm; aluminum coil 0.2mm;
25mm alyuminiy lasan; aluminum coil 25×21;aluminium sheet roll 0.2mm
How is aluminum coil produced?
Aluminum coils need to go through a series of processing steps before use to obtain thinner aluminum coils.
1. Solvent. Birinchidan, the raw material, the aluminum ingot, needs to be melted and alloyed, and after electromagnetic stirring, the furnace is guided to the holding furnace.
2. Over the mold. Through a set of molds, adjust the corresponding width.
3. Kasting. 6-8mm thick cast-rolled aluminum coils are made by casting and rolling mills.
4. Cool. The casted aluminum coil needs to be air-cooled and rolled to the corresponding thickness in a cold rolling mill.
5. Annealing. The cold-rolled aluminum coil has a certain degree of rigidity. It is annealed to reach the corresponding state, and then pulled and bent to straighten the shape. After inspection, it is packaged into a finished aluminum coil.
6. Painted. Aluminum coils can be processed into different types, transferred to the color-coated aluminum coil production line, and produced into color-coated aluminum coils after unwinding, oldindan davolash, chroming, and coating coating winding.
2000 Alyuminiy rulons Chemical Element:
| Qotishma |
Va |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Of |
In |
Boshqalar |
Al |
|---|
| 2011 |
0.40 |
0.70 |
5.0-6.0 |
- |
- |
- |
0.30 |
0.1 |
- |
≤0.05 |
Qoling |
|---|
| 2014 |
0.50-1.2 |
0.70 |
3.9-5.0 |
0.4-1.2 |
0.20-0.80 |
0.10 |
0.25 |
- |
- |
≤0,15 |
Qoling |
|---|
| 2017 |
0.80 |
0.70 |
3.5-4.6 |
0.40-1.0 |
0.20-0.80 |
0.10 |
0.25 |
0.1 |
- |
≤0,15 |
Qoling |
|---|
| 2018 |
0.80 |
0.70 |
3.5-4.5 |
0.20 |
0.45-0.90 |
0.10 |
0.25 |
- |
1.7-2.3 |
≤0,15 |
Qoling |
|---|
| 2024 |
0.50 |
0.5 |
3.8-4.9 |
0.3-0.9 |
1.2-1.8 |
0.10 |
0.25 |
0.1 |
- |
≤0,15 |
Qoling |
|---|
| 2025 |
0.5-1.2 |
1.0 |
3.9-5.0 |
0.40-1.2 |
0.05 |
0.10 |
0.25 |
0.1 |
- |
≤0.05 |
Qoling |
|---|
| 2117 |
0.80 |
0.70 |
2.2-3.0 |
0.20 |
0.20-0.50 |
0.10 |
0.25 |
- |
- |
≤0.05 |
Qoling |
|---|
| 2218 |
0.80 |
1 |
3.5-4.5 |
0.2 |
1.20-1.80 |
0.10 |
0.25 |
0.1 |
1.7-2.3 |
≤0.05 |
Qoling |
|---|
| 2618 |
0.25 |
0.9-1.3 |
1.9-2.7 |
- |
1.3-1.8 |
0.10 |
0.25 |
0.1 |
0.9-1.2 |
≤0.05 |
Qoling |
|---|
2 Alyuminiy rulon seriyasis Ishlab chiqarish jarayoni:
Rolling jarayoni： issiq haddelenmiş / uy ( DC ), sovuq prokat liniyasi( CC ), quyma
Jahl：h12,h12,h16,h17,h18,h22,h24,h26,h34,h0 ;t651,
Boshqalar: Deep stamping
2000 Seriyali alyuminiy rulonni qo'llash
The 2000 series aluminum grades are high-performance and high-strength alloys; therefore, they are suitable for aircraft and aerospace applications. Biroq, adding copper also reduces ductility and corrosion resistance.
- For the production of machine and automotive parts, fasteners, pipes and fittings, and atomizer parts.
- For the manufacture of screw machine products.
- The best aluminum grade for aircraft and aerospace applications
- Widely used in marine equipment, wing tension members, bolts, nuts, hydraulic valves, gears, shafts, couplings, pistons, va boshqalar.
