The process of making alyuminiy rulonlari typically involves several steps. Bu erda jarayonning umumiy ko'rinishi:

Kasting: Birinchi qadam eritilgan alyuminiy qotishmasini hosil qilish uchun alyuminiy ingotlarini yoki qayta ishlangan alyuminiyni eritishdir. Keyin eritilgan alyuminiy ingot deb ataladigan katta to'rtburchak shakldagi qoliplarga quyiladi.

Issiq prokat: Alyuminiy ingotlari isitiladi va bir qator prokat tegirmonlaridan o'tkaziladi. The ingots are gradually reduced in thickness and lengthened in the process. This hot rolling process involves repeatedly passing the aluminum through sets of rollers to achieve the desired thickness.

Cold Rolling: After hot rolling, the aluminum strip is further processed through a cold rolling mill. Cold rolling involves passing the aluminum strip through a series of rollers at room temperature. This process refines the material, improves its surface finish, and reduces its thickness to the desired gauge.

Annealing: The cold-rolled aluminum strip may undergo annealing, which involves heating it to a specific temperature and then cooling it slowly. Annealing helps relieve internal stresses in the material and improves its formability.

Slitting: The cold-rolled and annealed aluminum strip is typically slit into narrower coils of the desired width. Slitting machines cut the wide strip into narrower strips, which will become individual coils.

Coil Coating (Optional): If the aluminum coils are intended for specific applications, they may undergo a coil coating process. Coil coating involves applying a protective or decorative coating to the surface of the aluminum coils. This coating can provide corrosion resistance, improve aesthetics, or enhance specific properties.

Qadoqlash: The final step involves packaging the aluminum coils for transportation and storage. The coils are typically wound tightly and secured with bands or straps to prevent unraveling or damage during handling and shipping.