1050 pure aluminum coil

1050 pure aluminum coil belongs to a commercially pure wrought family with a purity of 99.5% Aluminium. Except for Al, 0.4% of Fe is added to 1050 aluminum coil, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, and so does the 1050 aluminum coil.

1050 aluminum coil excellent corrosion resistance

Aluminum alloy 1050 is a popular grade of aluminum for general coil metal work where moderate strength is required. 1050 aluminum plain sheet roll is known for its excellent corrosion resistance, high ductility, and highly reflective finish.

Parameters of 1050 pure aluminum coil

1050 aluminum coil specification introduction

Equivalent name: a1050 aluminum coil, 1050a aluminum coil, al1050 aluminum coil, aa1050 aluminum coil,etc
Temper: soft HO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 etc
Thickness: 2 mm aluminum coil,3mm aluminum coil,etc

1050 aluminum coil weldability

When welding 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7xxx series, the recommend wire is 5356. For other alloys use 4043 filler wire.

1050 aluminum coil fabrication

Workability – Cold: Excellent
Machinability: Poor
Weldability – Gas: Excellent
Weldability – Arc: Excellent
Weldability – Resistance: Excellent
Brazability: Excellent
Solderability: Excellent

Chemical composition of 1050 aluminium sheet rolls

Elements

Others

Content

≤0.25

≤0.7

0.01-0.05

≤ 0.05

–

0.1

≤ 0.05

0.15

Remain

Mechanical properties of 1050 aluminium coils

Alloy Temper	Specified	Tensile strength	Yield strength	Elongation
	Thickness(mm)	(MPa)	(MPa)	(%)
1050-O/ 1050-H111	0.2-0.5	65-95	Min20	Min20
	0.5-1.5			Min22
	1.5-3.0			Min26
	3.0-6.0			Min29
	6.0-12.5			Min35
	12.5-80.0
1050-H112 aluminum coil	6.0-12.5	Min75	Min30	Min20
	12.5-80.0	Min70	Min25
1050-H12 aluminum coil	0.2-0.5	85-125	Min65	Min2
	0.5-1.5			Min4
	1.5-3.0			Min5
	3.0-6.0			Min7
	6.0-12.5			Min9
	12.5-40.0
1050-H14 aluminum coil	0.2-1.5	105-145	Min85	Min2
	1.5-3.0			Min4
	3.0-6.0			Min5
	6.0-12.5			Min6
	12.5-25
1050-H16 aluminum coil	0.2-0.5	120-160	Min100	Min1
	0.5-1.5			Min2
	1.5-4.0			Min3
1050-H18 aluminum coil	0.2-0.5	Min135	Min120	Min1
	0.5-1.5	Min140		Min2
	1.5-3.0			Min2
1050-H19 aluminum coil	0.2-0.5	Min155	Min140	Min1
	0.5-1.5	Min150	Min130
	1.5-3.0
1050-H22 aluminum coil	0.2-0.5	85-125	Min55	Min4
	0.5-1.5			Min5
	1.5-3.0			Min6
	3.0-6.0			Min11
	6.0-12.5			Min12
1050-H24 aluminum coil	0.2-0.5	105-145	Min75	Min3
	0.5-1.5			Min4
	1.5-3.0			Min5
	3.0-6.0			Min8
	6.0-12.5
1050-H26 aluminum coil	0.2-0.5	120-160	Min90	Min2
	0.5-1.5			Min3
	1.5-4.0			Min4
1050-H28 aluminum coil	0.2-0.5	Min140	Min110	Min2
	0.5-1.5
	1.5-3.0			Min3

For its content above in the chart, 1050 aluminum coil has high ductility and a highly reflective finish. Besides, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. However, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enable our products to have a vast application.

Applications of 1050 aluminum coil

1050 aluminum coil has high ductility and a highly reflective finish. Besides, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. However, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enable our products to have a vast application.

Aluminium Alloy 1050 (1050 A) is available in Plate, Coil, Strip, Bar, Wire, Drawn Tube, Welding Wire, Forging Stock, and Rivet Stock.

What is 1050 aluminum coil used for?

Alloy 1050 is typically used for:

1050 aluminum coil for chemical process plant equipment
1050 aluminum coil for food industry containers
1050 aluminum coil for pyrotechnic powder
1050 aluminum coil for architectural flashings
1050 aluminum coil for lamp reflectors
1050 aluminum coil for cable sheathing

1050 aluminum coil factory

Huawei Aluminum is a large aluminum coil factory in China, 1050 1060 prepainted aluminum coil manufacture, 1050 aluminum coils are our hot-selling products. We have 22 years of experience in the production and export of aluminum industry, and we are a manufacturer that can guarantee stable delivery, price and quality. There are export cooperative buyers in more than 70 countries such as South Korea, Germany, Turkey, Italy, India, the United Arab Emirates and Pakistan.