Wat is 6061 Spoel van aluminiumlegering?
6061 legering aluminium spoel behoort tot: 6000 serie aluminium spoel:. 6061 aluminium spoelen is de meest veelzijdige van de warmtebehandelbare aluminiumlegeringen. Hoewel minder sterk dan de meeste 2xxx- en 7xxx-legeringen, 6061 aluminium spoel biedt een uitgebreid scala aan mechanische eigenschappen en corrosieweerstand en kan worden vervaardigd door veel van de veelgebruikte praktijken. In the “O” temper or annealed condition, legering 6061 aluminum coil has good formability. In the T4 condition, fairly severe forming can be done; whereas, in the T6 condition, properties may be obtained by artificial aging.
6061 aluminum coil alloy characteristics
6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. Originally called “Alloy 61S”, it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063).It is one of the most common alloys of aluminum for general-purpose use.
It is commonly available in pre-tempered grades such as 6061-O (gegloeid), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).Woedeaanval:O T6 T651 etc.
The main alloying elements of 6061 alloy are magnesium and silicon, and Mg2Si phase is formed. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the alloy
Without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the adverse effects of titanium and iron on conductivity; Zirconium or titanium can refine grains and control recrystallization structure:
In order to improve the machinability, lead and bismuth can be added. In Mg2Si, the mg / Si ratio is 1.73. In the heat treatment state, Mg2Si is solid melted in aluminum, so that the alloy has the function of artificial age hardening.
6061 – t651 aluminum coil alloy
6061 – t651 is the main state of 6061 legering. It is a high-quality aluminum alloy product produced by heat treatment and pre stretching process. Although its strength cannot be compared with 2xxx series or 7xxx series, its magnesium and silicon
The alloy has many characteristics, such as excellent processing performance, excellent welding characteristics and electroplating, goede corrosiebestendigheid, high toughness, no deformation after processing, compact material without defects, easy polishing and coloring film capacity
Easy and excellent oxidation effect.
Representative applications include aerospace fixtures, electrical fixtures and communication fields. They are also widely used in automatic mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT and PC boards Solder carrier, enz.
A6061-t651 aluminum alloy plate for precision machining / die features:
1. Good formability and weldability.
2. Grote sterkte.
3. Good usability and excellent interface characteristics.
4. Easy to add Easy to coat.
5. Good corrosion resistance and oxidation resistance. Main applications: Aviation fixtures, vrachtwagens, tower buildings, schepen, pipelines and other equipment requiring strength, weldability and corrosion resistance
Areas of application in architecture. Such as’ aircraft parts, camera lens, coupler, ship accessories and hardware, electronic accessories and connectors, decorative or various hardware, hinge head, magnetic head, brake piston! Hydraulic piston, electrical accessories, valves and valve parts.
Parameters van 6061 legering aluminium spoel:
- Equivalente naam:: a6061, 6061A, aa6061, 6061aa, al6061, al6061a, 6061 aa, aa 6061, jis a6061p, al6061 class, aw6061 grade etc
- Woedeaanval
- Zachte OF, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 enz.
- T0, T2, T3, T4, T5, T6, T7, Q8, T24, T32, T35, T73, T74, T83, T351, T354, T650, T651, T851 enz
- Breedte: 610mm, 2650mm ( extra breedte ) enz
- Dikte: 0.25mm, 0.6mm, 2mm, 6mm enz
- Oppervlakte behandeling: bright finish etc
Chemische samenstelling van 6061 legering aluminium spoelen
- En ( Silicium ): 0.4 – 0.8
- Cu ( Koper ): 0.15 – 0.4
- Mg ( Magnesium ): ≤ 0.45
- Zn ( Zink ): ≤ 0.1
- Mn ( Mangaan ): ≤ 0.1
- Cr ( chroom ): 0.04 – 0.35
- Fe ( Ijzer ): 2.2 – 2.8
- Van ( Titanium ):≤ 0.15
- Anderen totaal: ≤ 0.15
- Al ( Aluminium ): rest
Mechanische eigenschappen van 6061 aluminium plaatrol
| Woedeaanval |
Treksterkte |
Opbrengststerkte |
Verlenging |
| KSI |
KSI |
% |
| 6061 O |
22 |
12 |
10-16 |
| 6061 T4 |
30 |
16 |
10-16 |
| 6061 T6 |
42 |
35 |
4-10 |
Performance of 6061 aluminium plaatrollen
1,6061 aluminum-magnesium alloy series of high-plastic alloy, heat treatment to strengthen, high impact toughness;
2, has excellent thermoplastic, welding performance and corrosion resistance;
3, no deformation after processing, the surface is very smooth, and easy anodizing and coloring;
4, excellent interface characteristics, Grote sterkte, good usability, strong corrosion resistance.
Toepassing van 6061 aluminum plate roll
It’s common for 6061 aluminum coil to be used for structural components, worm gears, electrical connectors, electrical fittings, marine fittings and hardware, marine components and for heavy duty structures that need good resistance to corrosion and strength-to-weight ratio. When in the annealed state, this metal can be cold worked using a variety of standard methods. For instance, it can be deep drawn, stamped, drilled, tapped, cut and bent.
- Truck bodies and frames
- Screw machine parts
- Structural components
- Coated Aluminium Roof Tile
6061 aluminum is commonly used for the following:
- Construction of aircraft structures, such as wings and fuselages, more commonly in homebuilt aircraft than commercial or military aircraft. 2024 alloy is somewhat stronger, but 6061 is more easily worked and remains resistant to corrosion even when the surface is abraded, which is not the case for 2024, which is usually used with a thin Alclad coating for corrosion resistance.
- Yacht construction, including small utility boats.
- Automotive parts, such as the chassis of the Audi A8.
- Some tactical flashlights
- Aluminum cans for the packaging of food and beverages.
- SCUBA tanks (na 1995)
- 6061 alloy aluminum coil for ACP
- 6061 alloy aluminum coil for aircraft
- 6061 alloy aluminum coil for electronic
