3004 H14 आणि 3004 H34 दोन्ही अॅल्युमिनियम मिश्र धातु आहेत, परंतु ते त्यांच्या यांत्रिक गुणधर्मांनुसार आणि स्वभावाच्या पदनामानुसार भिन्न आहेत.
The “H” in the alloy designation stands for “strain-hardened,” which means that the aluminum has been strengthened by a process of cold working or strain hardening. The number after the “H” indicates the level of strain hardening, with higher numbers indicating a greater degree of hardening.
3004 is a popular aluminum alloy that contains both manganese and magnesium, which improve its strength and corrosion resistance. दोन्ही 3004 H14 आणि 3004 H34 have the same chemical composition, सह 1.0-1.5% manganese and 0.8-1.3% मॅग्नेशियम, but they differ in terms of their temper designation.
3004 H14 aluminum coil is in the annealed or soft state, which means it has been fully strain-hardened to a temper of H14. This results in a relatively low strength but high ductility and good formability. It is typically used in applications that require good formability, such as sheet metal work, spinning, and drawing.
3004 H34 अॅल्युमिनियम कॉइल, दुसरीकडे, has undergone a partial strain hardening process to achieve a temper of H34. This results in higher strength and hardness compared to H14, but with slightly reduced ductility and formability. It is commonly used in applications that require higher strength and better corrosion resistance, जसे की ऑटोमोटिव्ह पार्ट्स, दबाव वाहिन्या, and roofing.
सारांश, 3004 H14 आणि 3004 H34 aluminum coils have the same chemical composition but differ in terms of their mechanical properties and temper designation. H14 is in the annealed or soft state, while H34 has undergone partial strain hardening to achieve higher strength and hardness.