Know more about 1050 aluminum coil
What is 1050 aluminum coil?
1050 pure aluminum coil belongs to a commercially pure wrought family with a purity of 99.5% Aluminium. Except for Al, 0.4% of Fe is added to 1050 aluminum coil, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, and so does the 1050 aluminum coil.
1050 aluminum coil excellent corrosion resistance
Aluminum alloy 1050 is a popular grade of aluminum for general coil metal work where moderate strength is required. 1050 aluminum plain sheet roll is known for its excellent corrosion resistance, high ductility, and highly reflective finish.
1050-aluminum-coilParameters of 1050 pure aluminum coil
1050 aluminum coil specification introduction
- Equivalent name: a1050 aluminum coil, 1050a aluminum coil, al1050 aluminum coil, aa1050 aluminum coil,etc
- Temper: soft HO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 etc
- Thickness: 2 mm aluminum coil,3mm aluminum coil,etc
1050 aluminum coil weldability
When welding 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7xxx series, the recommend wire is 5356. For other alloys use 4043 filler wire.
1050 aluminum coil fabrication
- Workability – Cold: Excellent
- Machinability: Poor
- Weldability – Gas: Excellent
- Weldability – Arc: Excellent
- Weldability – Resistance: Excellent
- Brazability: Excellent
- Solderability: Excellent
Chemical composition of 1050 aluminium sheet rolls
| Elements |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
| Content |
≤0.25 |
≤0.7 |
0.01-0.05 |
≤ 0.05 |
≤ 0.05 |
– |
0.1 |
≤ 0.05 |
0.15 |
Remain |
Mechanical properties of 1050 aluminium coils
Alloy
Temper |
Specified |
Tensile
strength |
Yield
strength |
Elongation |
| Thickness(mm) |
(MPa) |
(MPa) |
(%) |
| 1050-O/ 1050-H111 |
0.2-0.5 |
65-95 |
Min20 |
Min20 |
| 0.5-1.5 |
Min22 |
| 1.5-3.0 |
Min26 |
| 3.0-6.0 |
Min29 |
| 6.0-12.5 |
Min35 |
| 12.5-80.0 |
|
|
|
| 1050-H112 aluminum coil |
6.0-12.5 |
Min75 |
Min30 |
Min20 |
| 12.5-80.0 |
Min70 |
Min25 |
|
| 1050-H12 aluminum coil |
0.2-0.5 |
85-125 |
Min65 |
Min2 |
| 0.5-1.5 |
Min4 |
| 1.5-3.0 |
Min5 |
| 3.0-6.0 |
Min7 |
| 6.0-12.5 |
Min9 |
| 12.5-40.0 |
|
| 1050-H14 aluminum coil |
0.2-1.5 |
105-145 |
Min85 |
Min2 |
| 1.5-3.0 |
Min4 |
| 3.0-6.0 |
Min5 |
| 6.0-12.5 |
Min6 |
| 12.5-25 |
|
| 1050-H16 aluminum coil |
0.2-0.5 |
120-160 |
Min100 |
Min1 |
| 0.5-1.5 |
Min2 |
| 1.5-4.0 |
Min3 |
| 1050-H18 aluminum coil |
0.2-0.5 |
Min135 |
Min120 |
Min1 |
| 0.5-1.5 |
Min140 |
Min2 |
| 1.5-3.0 |
Min2 |
| 1050-H19 aluminum coil |
0.2-0.5 |
Min155 |
Min140 |
Min1 |
| 0.5-1.5 |
Min150 |
Min130 |
| 1.5-3.0 |
| 1050-H22 aluminum coil |
0.2-0.5 |
85-125 |
Min55 |
Min4 |
| 0.5-1.5 |
Min5 |
| 1.5-3.0 |
Min6 |
| 3.0-6.0 |
Min11 |
| 6.0-12.5 |
Min12 |
| 1050-H24 aluminum coil |
0.2-0.5 |
105-145 |
Min75 |
Min3 |
| 0.5-1.5 |
Min4 |
| 1.5-3.0 |
Min5 |
| 3.0-6.0 |
Min8 |
| 6.0-12.5 |
| 1050-H26 aluminum coil |
0.2-0.5 |
120-160 |
Min90 |
Min2 |
| 0.5-1.5 |
Min3 |
| 1.5-4.0 |
Min4 |
| 1050-H28 aluminum coil |
0.2-0.5 |
Min140 |
Min110 |
Min2 |
| 0.5-1.5 |
| 1.5-3.0 |
Min3 |
For its content above in the chart, 1050 aluminum coil has high ductility and a highly reflective finish. Besides, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. However, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enable our products to have a vast application.
Applications of 1050 aluminum coil
1050 aluminum coil has high ductility and a highly reflective finish. Besides, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. However, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enable our products to have a vast application.
Aluminium Alloy 1050 (1050 A) is available in Plate, Coil, Strip, Bar, Wire, Drawn Tube, Welding Wire, Forging Stock, and Rivet Stock.
What is 1050 aluminum coil used for?
Alloy 1050 is typically used for:
- 1050 aluminum coil for chemical process plant equipment
- 1050 aluminum coil for food industry containers
- 1050 aluminum coil for pyrotechnic powder
- 1050 aluminum coil for architectural flashings
- 1050 aluminum coil for lamp reflectors
- 1050 aluminum coil for cable sheathing
1050 aluminum coil factory
Huawei Aluminum is a large aluminum coil factory in China, 1050 1060 prepainted aluminum coil manufacture, 1050 aluminum coils are our hot-selling products. We have 22 years of experience in the production and export of aluminum industry, and we are a manufacturer that can guarantee stable delivery, price and quality. There are export cooperative buyers in more than 70 countries such as South Korea, Germany, Turkey, Italy, India, the United Arab Emirates and Pakistan.
