Aluminum sheet roll for aluminum trim coil overview
The aluminum trim coil is widely used for wrapping home’s exterior trim surfaces such as window and door casings, 현관 기둥, 물방울 가장자리, 그리고 근막. Huawei 알루미늄 트림 코일은 깨끗한, 혹독한 날씨에도 견디는 날카로운 마감. 거의 모든 모양으로 필드를 형성할 수 있습니다..
1100 알루미늄 트림 코일
1000 시리즈 알루미늄 코일 is widely used in the production of aluminium trim. 1100 aluminium alloy is an aluminum-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). 최소한의 99.0% 알류미늄, it is the most heavily alloyed of the 1000 시리즈. It is also the mechanically strongest alloy in the series and is the only 1000-series alloy commonly used in rivets. 동시에, 상대적으로 가볍게 합금되는 이점을 유지합니다. (다른 시리즈에 비해), 높은 전기 전도성과 같은, thermal conductivity, 내식성, 작업성. 냉간 가공으로 강화할 수 있습니다., 하지만 열처리가 아닌.
1100 aluminum trim coil machinability:
Aluminum/Aluminum 1100 alloy has excellent machinability especially when the alloy is machined in a hard temper. Carbide tooling is suitable, but high-speed steel tooling can also be used. In cases where heavy cuts are required, an oil lubricant must be used.
Aluminum trim coil forming:
Both hot and cold forming is easy to perform with Aluminium/Aluminum 1100 합금. This alloy can be cold worked extensively in the annealed condition without the need for intermediate annealing.
Type of aluminum trim coil
Aluminum trim coils are available in many colors and can be sorted by color.
| White aluminum trim coil |
Gray aluminum trim coil |
Aspen aluminum trim coil |
|---|
| Birchwood aluminum trim coil |
블랙 알루미늄 트림 코일 |
Cafe Cream aluminum trim coil |
|---|
| Cocoa Brown aluminum trim coil |
Geneva Blue aluminum trim coil |
Ocean Blue aluminum trim coil |
|---|
Aluminum trim coil welding:
Welding can be easily performed using all the conventional methods. It is suitable to use AL 1100 consumable electrodes and filler wire for the process.
Aluminum sheet roll for aluminium trim coil heat treatment:
Aluminium/Aluminum 1100 alloy cannot be successfully heat-treated other than to produce the annealed form and ‘O’ temper.
Forging: Aluminium/Aluminum 1100 alloy can be hot forged without much difficulty.
Hot Working:Hot-working can be easily performed on Aluminium/Aluminum 1100 합금.
Cold Working: Aluminium/Aluminum 1100 alloy is best suited for cold working as it has good ductility in the annealed temper condition. It can also be cold formed by bending, 그림, or spinning.
Aluminum trim coil annealing
After Aluminium/Aluminum 1100 alloy is extensively cold worked, annealing is required and can be performed at 343°C (650°F) for a suitable amount of time so as to ensure thorough heating and then it can be air-cooled.
Hardening: Aluminium/Aluminum 1100 alloy can be hardened by cold working only.
애플리케이션: Aluminium/Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and nameplates, decorative parts, giftware, cooking utensils, rivets and reflectors, and in sheet metal work.
