Екеуі де 3104 және 3004 әдетте әртүрлі қолданбаларда алюминий қорытпасынан жасалған катушкалар қолданылады, бірақ олардың химиялық құрамы мен қасиеттерінде біршама айырмашылықтар бар. Төменде салыстыру берілген 3104 алюминий катушкалар және 3004 алюминий катушкалар:
химиялық құрамы:
3104 алюминий катушкасы:
Алюминий (Әл): 95.7%
Магний (Mg): 0.8-1.3%
Марганец (Mn): 0.8-1.3%
Цинк (Zn): 0.25%
Басқа элементтер: Басқа элементтерді қадағалаңыз
3004 алюминий катушкасы:
Алюминий (Әл): 95.8-98.2%
Магний (Mg): 0.8-1.3%
Марганец (Mn): 1.0-1.5%
Темір (Фе): 0.7%
Басқа элементтер: Басқа элементтерді қадағалаңыз
Manganese content:
One of the main differences between these two alloys is the manganese content. Compared with 3104 алюминий, 3004 aluminum has a slightly higher manganese content. This difference affects the mechanical properties and formability of the alloy.
Қалыптастырушылық:
3004 алюминий is known for its excellent formability. It is typically used in applications that require deep drawing or forming, such as beverage cans.
3104 алюминий also has good formability, but may have slightly different properties in terms of stretchability and deformation behavior due to its lower manganese content.
Коррозияға төзімділік:
Both alloys have good corrosion resistance. They are suitable for applications where exposure to moisture and environmental factors is a consideration.
Қолдану:
3104 алюминий катушкасы:
Commonly used in the production of beverage can lids, shallow-drawn cans and automotive parts.
3004 алюминий катушкасы:
Widely used in the manufacture of beverage cans (tanks) as it provides excellent formability and corrosion resistance for this application.
Strength:
Both alloys have similar strength properties, but a slight difference in manganese content affects their mechanical properties. Specific strength values may depend on factors such as tempering and processing.
Дәнекерлеу мүмкіндігі:
Both alloys can be welded using common methods such as TIG or MIG welding and exhibit good weldability.
Although 3104 және 3004 aluminum coils have some similarities in their aluminum-magnesium-manganese alloy composition, they differ in their manganese content and are generally used in different applications. Due to its excellent formability, 3004 is often the material of choice for beverage can bodies, кезінде 3104 is used in applications such as can ends and automotive parts. The choice between them depends on the specific requirements of the application.