Pabrika presyo pakyawan 5005 haluang metal aluminyo likawin para sa pagbebenta, pasadyang 5005 metal aluminiyum sheet roll mula sa China tagagawa at supplier

Ano ang aluminum coil grade 5005 ?

5005 haluang aluminyo coil na pag-aari ng 5000 serye haluang aluminyo coil. 5005 aluminyo coil ng HuaWei Alu ay sertipiko sa ASTM, EN pati na rin ang JIS, atbp. at ito ay maaaring hiwa upang laki sa pangangailangan ng mga customer. Mg ay ang pangunahing elemento sa 5005 aluminyo coil at kapag ito ay ginagamit bilang pangunahing elemento o pinagsama sa Mn, mataas na lakas at walang init treatable katangian ay maaaring maisasakatuparan. 5005 aluminyo ng HuaWei Alu. has many tempers available, such as 5005-H12, 5005-H14, 5005-H16, 5005-H18,5005-H22, 5005-H24, 5005-H32, 5005-H34, 5005-H36, 5005-H38, atbp.

Factory 5005 aluminum coil product display

Aluminium haluang-haluin 5005 naglalaman ng nominally 0.8% magnesiyo. It has medium strength, magandang weldability, and good corrosion resistance in marine atmospheres. Ito rin ay may mababang density at mahusay na thermal conductivity karaniwan sa lahat ng mga alumnium alloys. It is the most commonly used grade of aluminium in coil and coil form.

Aluminium haluang-haluin 5005 is a lean aluminium magnesium alloy which can be hardened by cold work: it is not heat treatable to higher strength.

Mga Parameter ng 5005 haluang haluang aluminyo

• Katumbas na pangalan: a5005, 5005a, al5005, aa5005, 5005 aa, aa 5005 grado atbp
• Temperatura
• • Malambot NA HO, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 atbp
  • T0, T2, T3, T4, T5, T6, T7, T8, T24, T32, T35, T73, T74, T83, T351, T354, T650, T651, T851 atbp
• Lapad: 610mm, 2650mm ( dagdag na lapad ) atbp
• Kapal: 0.4mm, 0.6mm, 0.8mm atbp

General Features

5005 is a non-heat treatable alloy with magnesium content. It can be strengthened (hardened) by cold working. It scores well in weld-ability, pormalidad, at kaagnaan pagtutol (especially when anodized).

Forming

5005 has excellent formability, especially in softer tempers.

Hinang

5005 alloy is noted for excellent welding characteristics. When 5005 material will be welded and then anodized

Machining

5005 machinability is generally fairly poor . Soft 5005 tempers machine worse than harder tempers. 5005 H34 and 5005 H38 can be machined, but with much more difficulty than many other aluminium alloys.

Kemikal komposisyon ng 5005 haluang haluang aluminyo

• Si ( Silicon ): ≤ 0.3
• Cu ( Tanso ): ≤ 0.2
• Mg ( magnesiyo ): 0.5 – 1.1
• Zn ( sink ): ≤ 0.25
• Mn ( mangga ): ≤ 0.2
• Cr ( Chromium ): ≤ 0.1
• Paa ( bakal ): ≤ 0.7
• Ti ( Titanium ): /
• Ang iba naman ay kabuuan: ≤ 0.15
• Al ( Aluminyo ): natitirang

Mekanikal katangian ng 5005 haluang alumnium coils

5005 katangian sa pamamagitan ng temperatura (karaniwang)

Aplikasyon ng 5005 haluang alloy alumnium sheet roll

5005l aluminum coil strength and 3003 equivalent, weld metal, ganda ng workability 5005 aluminum plate and 3003 alloy similar, may katamtaman na lakas at magandang kaagnaan pagtutol. Anodic oxide film is more bright than the oxide film on the 3003 haluang haluang dulugad, and is consistent with the tone of the 6063 haluang haluang dulugad.

5005 aluminum coil is also a non-heat treatable alloy and it can be strengthened (hardened) by cold working. Gayunpaman, hot working should not normally be necessary. Bukod pa sa, it scores well in formability, especially in softer tempers. The machinability of 5005 aluminum coil is generally fairly poor. 5005-H34 and 5003-H38 can be machined, but with much more difficult than many other aluminum alloys.

The main content of 5005 aluminium coil is Fe, Mg and Si, kaya, it has good weld-ability and resistance to correction (especially when anodized), which resulting in suitable for marine applications. 5005 aluminium coil is also a non-heat treatable alloy and it can be strengthened (hardened) by cold working. Gayunpaman, hot working should not normally be necessary. Bukod pa sa, it scores well in formability, especially in softer tempers. The machinability of 5005 aluminium coil is generally fairly poor. 5005-H34 and 5003-H38 can be machined, but with much more difficult than many other aluminium alloys.

Haluang haluang-haluin 5005 Aluminium coil is typically used for:

• Buildings – Roofing, Cladding, Corrugated coil
• Mga Signage, Mga Palatandaan ng Kalsada & Name Plates
• Food & Kemikal kagamitan
• Furniture
• Anodised Parts
• HVAC Equipment
• Packaging
• Pipe and Tube
• Can Bodies

Commonly used in the manufacture of appliances, maliit na bangka, gas linya, ref panel, and utensils. 5005 is also used in architectural components, and as an electrical conductor. Especially useful where excessive finishing costs are encountered in the use of 3003 alloys due to surface roughness upon drawing.