7075 introducción de bobina de aluminio
Aleación 7075 Las bobinas de aluminio han sido y siguen siendo el estándar básico con un buen equilibrio de propiedades necesarias para aplicaciones aeroespaciales.. 7075 El aluminio se encuentra entre las aleaciones de mayor resistencia disponibles y se utiliza en piezas sometidas a grandes esfuerzos.. La resistencia a la corrosión y la maquinabilidad se califican como regulares, aunque la adición de cromo proporciona una buena resistencia al agrietamiento por corrosión bajo tensión en 7075 productos de chapa de aluminio. As with alloy 2024, aleación 7075 is available in bare form or in clad to offer even further protection from corrosion.
It is characterized by good plasticity after solution treatment, especially good heat treatment strengthening effect, high strength below 150 “C, especially good low-temperature strength, poor welding performance and stress corrosion cracking tendency; it needs to be coated with aluminum or other protective treatment. Double aging can improve the ability of the alloy to resist stress corrosion cracking. The plasticity under annealing and just quenching is slightly lower than that under the same condition
2A12 in the sample state is slightly better than 7A04. The static fatigue, notch sensitivity and stress corrosion performance of the plate are better than 7A04.
This alloy has good mechanical properties and anodic reaction. It is a typical aviation aluminum.It is used to manufacture aircraft structures and other high stress structural parts requiring high strength and strong corrosion resistance, such as aircraft upper and lower wing wall panels, stringers, spacer frames, etc.. it has good plasticity and heat resistance after solution treatment
The strengthening effect of treatment is particularly good. Those below 150 ° C have high strength, especially good low-temperature strength, poor welding performance, stress corrosion cracking tendency, and two-stage aging can improve the resistance to corrosion
SCC performance.
7075 aluminum coil alloy
7075 aluminum alloy plate for precision machining / mold 7xxx series is aluminum, zinc and magnesium alloy, one of the most powerful commercial alloys, with general corrosion resistance and mechanical properties. 7075 Al-Zn mg Cu superhard aluminum and 7075 alloy are ultra-high strength deformed aluminum alloys that have been used in aircraft manufacturing since the late 1940s and are still widely used in aviation industry.Among them, 7075t651 is particularly top-grade, which is known as the best aluminum alloy
7075 aluminum coil chemical composition:
| Silicio |
0.4 |
| Hierro |
0.5 |
| Cobre |
1.2-2.0 |
| Manganeso |
0.3 |
| Magnesio |
2.1-2.9 |
| Cromo |
0.18-0.28 |
| Zinc |
5.1-6.1 |
| Titanio |
0.2 |
| Otros, each |
0.05 |
| Otros, total |
0.15 |
| Balance, Aluminio |
7075 aluminum coil typical mechanical properties:
| Temperamento |
Resistencia a la tracción |
Límite elástico |
Alargamiento |
|---|
|
KSI |
KSI |
% |
| O (recocido) |
40 |
21 |
9-10 |
|---|
| T6 |
74-78 |
63-69 |
5-8 |
|---|
7075 aluminum coil applications
- Aircraft and aerospace structures
- Corrugated Aluminium Roof Panels
